DUCTING HOSE

Hi-Tech Style RFH

Style RFH
Duct Hose

Constructed of thermoplastic rubber and reinforced with a wire helix, RFH is the most versatile general purpose hose available today. No cements, solvents, chemicals, adhesives or glues are used in the manufacturing process of RFH. RFH has superior chemical resistance and is capable of handling fumes as tough as Methyl Ethyl Ketone, sulfuric acid or toluene.

RFH can be manufactured in other colors. RFH can also be supplied with a color stripe. Please consult us as to minimums and prices for other lengths and non-standard diameters.

  • Wide temperature range: -60ºF to 275ºF continuous service, intermittent to 300ºF
  • Sizes: 2" through 20" ID
  • Standard lengths: 25, 50 or 100 feet
  • Standard color: Black
  • Excellent ozone resistance
  • Superior chemical resistance
  • Good abrasion resistance
  • Low compression set

Available with Wear Strip: RFH-W

Available in White: RFH-White


Hi-Tech Style UFD

Style UFD
Duct Hose

Constructed of thermoplastic urethane and reinforced with a wire helix, UFD offers superior abrasion resistance. UFD is the answer for those who want a lightweight, flexible hose which can handle much abrasion. UFD can be used in numerous applications such as leaf loading, chip handling, dust collection, straw blowing, etc. The superior transparency of the UFD allows users to locate blockages.

Consult us about non-standard diameters and lengths. Heavier or lighter versions are available for specific applications. Special colors are also available.

  • Temperature range: -65ºF to 200ºF
  • Sizes: 2" through 18" ID
  • Standard lengths: 25 or 50 feet
  • Colors: Clear or Black
  • High tear strength
  • Superior abrasion resistance

Silicone Fiberglass Hose Style SF-1

Style SF-1
Duct Hose

A one ply silicone fiberglass hose with a helically wound chemically treated spring steel wire bonded to the interior surface of the hose. A fiberglass cord is wound over the outside between the wire coils. The hose is heat vulcanized for maximum adhesion and rubber-to-wire bond.

Recommended for low pressure handling of air, dust or fumes. SF-1 is ideal for use in situations where minimum weight is a necessity. SF-1 is not recommended for liquids or abrasive materials.

  • Temperature range: -65ºF to 450ºF (Intermittent to 500ºF)
  • Standard length: 12 Feet
  • Color: Orange/red
  • Sizes: 1" to 12" ID

Silicone Fiberglass Hose Style SF-2

Style SF-2
Duct Hose

A two ply silicone fiberglass hose with a helically wound spring steel wire imbedded between the plies to insure maximum flexibility and minimum diameter restriction in sharp bend areas. The hose is wound with a fiberglass cord and heat vulcanized to provide greater strength and serviceability.

Recommended for handling of air, dust, fumes and light powders. The inner ply provides a smooth interior for maximum flow and minimum friction loss. SF-2 is lightweight, non-kinking and simple to install. SF-2 is not recommended for handling liquids or abrasive materials.

  • Temperature range: -75ºF to 500ºF (Intermittent to 600ºF)
  • Standard length: 12 Feet
  • Color: Orange/red
  • Sizes: 3/4" to 12" ID