ALLIGATOR LACING

Alligator Belt Lacing


How Alligator Lacing Works

Alligator lacing utilizes a design with teeth that enter parallel to the length of the belt and imbed clear through the belt carcass. The teeth are formed so that when they are driven into the belt, the vital longitudinal carcass fibers are not severed.

Additional strength is obtained due to the connecting bar and because the fastener strip is one continuous piece. This provides a strong, vise-like hold on the belt and distributes belt tension evenly across the entire belt width. The one-piece fastener strip also insures that there are no loose pieces to work themselves out of the belt and into the conveyed product. The straight splice obtained with a continuous strip of lacing also helps with hinge pin insertion.

Applications

  • Manufacturing assembly lines, food, package and parts handling, checkout counters and agricultural equipment.

P.I.W. (pounds per inch width)

  • Use with belts that are mechanically rated up to 200 PIW (maximum recommended tension range varies by lacing size.)

Installation Method

  • Requires only a hammer; no special tools needed. Unique, patented clips and round gauge rod act as an "extra pair of hands." For production splicing, Alligator belt lacing machines are offered.

Splicing Method

  • Alligator lacing is a continuous one-piece fastener strip, tailored to all standard belt widths. Lacing is secured with teeth that imbed lengthwise of the belt, providing a strong, vise-like attachment.

Pulley Diameter Range

  • Alligator lacing operates over a wide range of minimum pulley diameters from 1" to 14", depending on lacing size.

Metals Available

  • Steel- is the standard fastener material.
  • Stainless Steel- Type 316.

Fastener Profile

  • Low profile, one-piece design results in an exceptionally smooth joint.

Range

  • Operates on belts 1/32" to 1/2" thick.

Alligator Lacing Selection Chart
LacingBelt PIW RatingBelt Thickness RangeMin. Pulley Dia.
Size #
0025Up to 1/16"1"
1451/16 - 3/32"1-1/2"
7503/32 - 9/64"2"
15651/8 - 5/32"2-1/2"
20955/32 - 3/16"3"
251003/16 - 7/32"4"
271007/32 - 9/32"5"
351509/32 - 5/16"7"
451655/16 - 3/8"9"
551753/8 - 7/16"12"
652007/16 - 1/2"14"

Ordering Numbers

Each carton contains everything needed for 4 complete joints; 4 sets (joints) of lacing, 4 corrugated hinge pins and 1 installation gauge pin with clips.

For Number 00
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"00-121005000S-1210528
14"00-141005100S-1410529
16"00-1610052--
18"00-181005300S-1810531
20"00-2010054--
24"00-241005600S-2410534
36"00-361006100S-3610539
48"00-481006300S-4810541
60"00-601006500S-6010543
For Number 1A
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"1A-12100701S-1210545
14"1A-1410071--
16"1A-1610072--
18"1A-18100731S-1810548
20"1A-20100741S-2010549
24"1A-24100761S-2410551
30"1A-3010079--
36"1A-36100811S-3610556
42"1A-4210082--
48"1A-48100831S-4810558
60"1A-60100851S-6010560
For Number 1B
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"1B-12124251BS-1212444
18"1B-18124281BS-1812447
20"1B-20124291BS-2012448
24"1B-24124311BS-2412450
36"1B-36124361BS-3612455
For Number 7
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"7-12100907S-1210562
14"7-14100917S-1410563
16"7-1610092--
18"7-18100937S-1810565
20"7-2010094--
24"7-24100967S-2410568
30"7-30100997S-3010571
36"7-36101017S-3610573
42"7-42101027S-4210574
48"7-48101037S-4810575
60"7-60101057S-6010577
For Number 15
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"15-121048215S-1210491
14"15-1410110--
16"15-1610111--
18"15-181011215S-1810581
20"15-2010113--
24"15-241011515S-2410584
30"15-301011815S-3010587
36"15-361012015S-3610589
42"15-4210121--
48"15-481012215S-4810591
60"15-601012415S-6010593
For Number 20
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"20-121048320S-1210492
14"20-1410130--
16"20-1610131--
18"20-181013220S-1810597
20"20-2010133--
24"20-241013520S-2410600
30"20-301013820S-3010603
36"20-361014020S-3610605
42"20-4210141--
48"20-481014220S-4810607
60"20-6010144--
For Number 25
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"25-121048425S-1210493
14"25-1410150--
16"25-1610151--
18"25-181015225S-1810613
20"25-2010153--
24"25-241015525S-2410616
30"25-301015825S-3010619
36"25-361016025S-3610621
42"25-4210161--
48"25-481016225S-4810623
60"25-6010164--
For Number 27
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"27-121048527S-1210494
14"27-141016527S-1410627
16"27-1610166--
18"27-181016727S-1810629
20"27-2010168--
24"27-241017027S-2410632
30"27-301017327S-3010635
36"27-361017527S-3610637
42"27-421017627S-4210638
48"27-481017727S-4810639
60"27-601017927S-6010641
For Number 35
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"35-1210486--
14"35-1410180--
16"35-1610181--
18"35-1810182--
20"35-2010183--
24"35-241018535S-2410648
30"35-301018835S-3010651
36"35-361019035S-3610653
42"35-4210191--
48"35-4810192--
60"35-6010194--
For Number 45
Belt WidthSteel316 Stainless Steel
Ordering NumberItem CodeOrdering NumberItem Code
12"45-1210487--
16"45-1610197--
18"45-1810198--
20"45-2010199--
24"45-241020145S-2410664
30"45-3010204--
36"45-361020645S-3610669
48"45-4810208--
60"45-6010210--
#55 AND #65 Steel Only
For Number 55
Belt WidthOrdering NumberItem Code
12"55-1210488
18"55-1810214
24"55-2410217
30"55-3010220
36"55-3610222
42"55-4210223
48"55-4810224
60"55-6010226
For Number 65
Belt WidthOrdering NumberItem Code
18"65-1810232
24"65-2410235
36"65-3610240

Extra hinge pins are available in packs of ten in various lengths made from corrugated steel and corrugated stainless steel. Hinge pins of nylon-covered steel and nylon-covered stainless steel are available in rolls of 10, 100 and 500 feet.


For volume users and production applications, an Alligator Installation Tool is available that installs numbers 00, 1B, 7 and 15.