URETHANE PROFILE BELTING

Orange-Go®, Clear-Go® and Quik-Go®

Urethane Belt
Orange-Go®Clear-Go®
  • Orange color, 85A Durometer.
  • USDA approved.
  • Most widely used general purpose urethane belt.
  • High coefficient of friction.
  • Highly flexible, allowing small pulley diameters.
  • Self tensioning, does not require take-ups.
  • Excellent abrasion resistance.
  • Ease of installation, stretches over pulleys.
  • Good chemical resistance.
  • Clear color, 95A Durometer.
  • USDA Approved.
  • Carries heavier loads than Orange-Go® with less stretch.
  • Lower coefficient of friction than Orange-Go®.
  • Requires larger pulleys than Orange-Go®.
  • Self tensioning, does not require take-ups.
  • Excellent abrasion resistance.
  • Ease of installation, stretches over pulleys.
  • Good chemical resistance.
Easily spliced endless using the Butt Welding Kit.
Clear color, 85A durometer - made to order only.
Quik-Go®
  • Clear color, 85A Durometer.
  • Hollow construction.
  • Highly flexible.
  • Good chemical resistance.
  • Installs without disassembling shafts.
  • Made endless with barbed connector; no welding.

Profiles available in Orange-Go®, Clear-Go® and Quick-Go®


Butt Welding Kit

The Butt Welding Kit provides a fast, economical way to join the ends of Orange-Go®, Clear-Go® and even Quik-Go®. Kit includes belt cutters, flash cutters, clamping tool, hot knife, instructions and carrying case. The clamping tool is easy to use and ensures proper alignment of belt ends.


Urethane O-Rings and Twisted O-Rings

Urethane O-Rings
O-RingsTwisted O-Rings
  • Available in all standard Orange-Go® and Clear-Go® sizes and durometers.
  • Welded endless.
  • Highly elastic, excellent memory.
  • High coefficient of friction.
  • Accommodates misaligned shafts
  • Clear color, 85A Durometer.
  • Special hook design allows easy installation.
  • Strength comparable to O-Rings.
  • High coefficient of friction.
  • Accommodates misaligned shafts.
  • Lengths available welded to customer specifications.
  • To Order Specify:
    • Cut Length or
    • Inside Diameter or
    • Circumference
  • (We prefer Cut Length)
  • Stock Sizes, Twisted O-Rings:
    • 3/16" x 5-1/2"
    • 3/16" x 6"
    • 3/16" x 12"
    • 3/16" x 12-1/2"
    • 3/16" x 13"
    • 3/16" x 13-1/2"
    • 3/16" x 14-1/2"

Hyfen® Reinforced Urethane Belting

Hyfen® Reinforced Urethane Belting

Characteristics

  • Blue-green color.
  • Round sections, 85A Durometer.
  • V-sections, 85A Durometer.
  • First reinforced urethane open ended belt.
  • Excellent strength.
  • Patented overlap splice.
  • Very low stretch.
  • Good flexibility allows small pulleys.
  • Requires mechanical take-up.
  • High coefficient of friction.
  • Good chemical resistance.
  • Highly resistant to abrasion.
  • Replaces standard urethane belting in high load applications.

Size Ranges

  • Round Sections: 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" & 3/4"
  • V-Sections: (Cogged or Uncogged)
    • A - 1/2" wide x 3/8" high
    • B - 21/32" wide x 1/2" high
    • C - 7/8" wide x 5/8" high

Power-Twist® Polyester Link Belting

Logo Power-Twist® Belt

Characteristics

  • Polyester/Polyurethane construction.
  • Red color.
  • Hand assembled to any length.
  • Horsepower ratings equivalent to classical section V-belts.
  • Higher resistance to oil, water, extremes of temperature, chemicals and solvents.
  • Twist-lock construction allows quick, hand-assembly and installation without dismantling drives.
  • Ask about FDA approved Poly-Twistlink for food conveying applications.
  • V-Sections (Top widths)
    • 3L (3/8" wide)
    • A (1/2" wide)
    • B (21/32" wide)
    • C (7/8" wide)
All products, pictures and descriptions on this page are copyrighted by
Fenner Drives