The following table shows some of the common rubber extrusions that are available. To order or request a quote on any of these, we would need complete dimensions and the type of rubber that you would like the extrusion to be made of.
At the bottom of this page is a table showing some rubber elastomers that
extrusions can be made of, along with the general properties of each compound.
Basic Type | Examples | ||
---|---|---|---|
Angle Extrusions | |||
Refrigerator Door Seals | |||
Special Extruded Tubing / Seals | |||
U-Channels | |||
Solid Strip / Cord | |||
Standard Cords | |||
Bumper Strips | |||
Sealing Strips | |||
D-Strips | |||
H-Strips | |||
P-Strips | |||
T-Strips | |||
Special Extrusions |
The table below shows the general characteristics of some of the common
rubber compounds. Because elastomers are mixed with various chemicals to provide
a wide range of physical properties, please call the _____ Rubber & Gasket
Customer Service Department with your specific application.
ASTM Designations | Common Name | Composition | General Properties |
---|---|---|---|
CR | Neoprene | Chloroprene |
|
NBR | Nitrile (Buna-N) | Acrylonitrile-butadiene |
|
IIR | Butyl | Isobutene-isoprene |
|
SBR | SBR | Styrene-butadiene |
|
EPDM | EPDM | Ethylene-propylene Diene Terpolymer |
|
SIL | Silicone | Polysiloxthane |
|
VI | Viton® | Flourocarbon |
|
CSM | Hypalon® | Chloro-sulfonated Polyethylene |
|
NR | Natural Rubber | Isoprene Rubber (Natural) |
|
Viton® and Hypalon® are registered trademarks of DuPont Dow Elastomers