BARBED INSERTS

3500 Series Steel Nipples

Style 3500 Steel Nipples
Zinc PlatedMale NPTFemale NPT
Hose SizeNPT SizePart #Part #
1/4"1/8"3501-
1/4"1/4"35023542
1/4"3/8"3504-
3/8"1/4"35053545
3/8"3/8"35063546
3/8"1/2"3508-
1/2"1/4"3509-
1/2"3/8"35103550
1/2"1/2"35123552
1/2"3/4"3511-
3/4"1/2"3513-
3/4"3/4"35143554
3/4"1"3515-
1"3/4"3516-
1"1"3518-

Brass Barbed Inserts

Brass InsertsMale NPTSwivel Male NPTRigid Female NPTSwivel Female NPT
Hose SizeNPT SizePart #Part #Part #Part #
1/8"1/8"BN11-BF11BFS11
3/16"1/8"BN151--BFS151
3/16"1/4"BN152--BFS152
1/4"1/8"BN21-BF21-
1/4"1/4"BN22BN22SWIVBF22BFS22
1/4"3/8"BN23---
5/16"1/8"BN251-BF251-
5/16"1/4"BN252-BF252BFS252
5/16"3/8"BN253---
3/8"1/8"BN31-BF31-
3/8"1/4"BN32BN32SWIVBF32BFS32
3/8"3/8"BN33BN33SWIVBF33BFS33
3/8"1/2"BN34---
1/2"1/4"BN42---
1/2"3/8"BN43-BF43-
1/2"1/2"BN44-BF44BFS44
1/2"3/4"BN46---
5/8"3/8"BN53---
5/8"1/2"BN54---
5/8"3/4"BN56---
3/4"1/2"BN64---
3/4"3/4"BN66--BFS66
1"3/4"BN86---
1"1"BN88---
Note: The above part numbers are Dixon. At _____ Rubber and Gasket Co., we distribute for many different manufacturers. If you require a size or configuration not listed, please contact our Customer Service Department for availability.

Brass Push-On Inserts

Push-On inserts are intended for use with Push-On style hose Only. No hose clamps or ferrules are needed.

Brass Push-On Inserts
Push-On InsertsMale NPTFRigid Female NPTFSwivel Female NPSMMender
Hose SizeNPT SizePart #Part #Part #Part #
1/4"1/8"BPN21---
1/4"1/4"BPN22BPF22BPFS22BPM2
1/4"3/8"BPN23---
5/16"1/4"BPN252---
3/8"1/8"BPN31---
3/8"1/4"BPN32BPF32BPFS32-
3/8"3/8"BPN33BPF33-BPM3
3/8"1/2"BPN34---
1/2"3/8"BPN43---
1/2"1/2"BPN44--BPM4
5/8"1/2"BPN54---
3/4"1/2"BPN64---
3/4"3/4"BPN66--BPM6
Note: The above part numbers are Dixon. At _____ Rubber and Gasket Co., we distribute for many different manufacturers. If you require a size or configuration not listed, please contact our Customer Service Department for availability.

Nylon, Polypropylene and Kynar Inserts

Properties of Nylon, Polypropylene and Kynar

Nylon inserts are generally acceptable for working pressures up to 150 psi at normal room temperatures. At very low pressures, temperatures can approach 175º F with no degradation of the insert's strength. Nylon inserts should not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfuric acid or xylene. Nylon should not be used with compressed gas. Parts are white.

Polypropylene inserts should not be used with aromatic hydrocarbons, carbon tetra-chloride, gasoline, hexane, kerosene, nitric acid, sodium hydrochlorite, toluene, trichlorethylene or xylene. Polypropylene should not be used with compressed gas. Parts are black.

Kynar polyvinylidene fluoride is a tough engineering thermoplastic that offers a unique balance of properties. It has the characteristic stability of fluoropolymers when exposed to harsh thermal, chemical and ultraviolet environments. Parts are tan.

Important Properties of Kynar Fluoropolymers

  • Mechanical strength and toughness
  • High abrasion resistance
  • High thermal stability
  • Electrically nonconductive material
  • High Purity
  • Resistance to most chemicals and solvents
  • Resistance to ultraviolet and nuclear radiation
  • Resistance to weathering
  • Resistance to fungi
Nylon, Polypropylene and Kynar Inserts
Plastic InsertsNylonPolypropyleneKynar
Hose SizeNPT SizePart #Part #Part #
1/4"1/8"TN21PPN21KN21
1/4"1/4"TN22PPN22KN22
1/4"3/8"TN23PPN23-
1/4"1/2"TN24PPN24-
1/4"3/4"TN26--
1/4"1"TN28--
5/16"1/4"TN252--
3/8"1/8"TN31PPN31-
3/8"1/4"TN32PPN32KN32
3/8"3/8"TN33PPN33KN33
3/8"1/2"TN34PPN34KN34
3/8"3/4"TN36PPN36-
1/2"1/8"TN41--
1/2"1/4"TN42PPN42-
1/2"3/8"TN43PPN43KN43
1/2"1/2"TN44PPN44KN44
1/2"3/4"TN46PPN46-
5/8"3/8"TN53--
5/8"1/2"TN54PPN54-
5/8"3/4"TN56PPN56-
5/8"3/8"TN53--
5/8"1/2"TN54PPN54-
5/8"3/4"TN56PPN56-
3/4"3/8"TN63--
3/4"1/2"TN64PPN64KN64
3/4"3/4"TN66PPN66KN66
3/4"1"TN68PPN68-
1"3/4"TN86PPN86KN86
1"1"TN88PPN88KN88
1-1/4"1"TN158--
1-1/4"1-1/4"TN150PPN150-
1-1/4"1-1/2"TN1520--
1-1/2"1-1/4"TN2015--
1-1/2"1-1/2"TN200PPN200-
2"2"TN250PPN250-
Note: Other plastic hose ends and adapters are available; all plastic ends (except Kynar) are sold in package quantities only. Please contact our Customer Service Department for information.